GSM/DCS/3G/4G/5G » REPEATERS » BIBAND » BOSSGSM-GD

1000m2 repeater kit, 5 rooms, 900/1800Mhz

Repeater Kit 1000m2, 5 rooms, 900/1800Mhz

The mobile repeater for the 900Mhz and 1800Mhz bands:

The antenna located on the roof receives signal on the 2 frequency bands used in mobile telephony (2G+3G) the signal is conducted through the coaxial cable to the mobile amplifier for all bands installed inside the house.
The 2-band amplifier amplifies the signals and rebroadcasts them in the area where you need coverage.
Your cell phones, laptops and tablets can now communicate thanks to these amplified signals.

This repeater amplifies the frequencies:

GSM (900Mhz), GSM (1800Mhz) ,

how does it work?

An antenna is installed on the roof of the house, and it captures the mobile signal coming from all operators. This signal travels through a coaxial cable to the amplifier.
The repeater amplifies the signal in both directions (to and from the house), and distributes it throughout the house.
Thanks to the amplified signal, your mobile devices can now communicate without any problems.

Features:

Amplifies GSM signals
Coverage: up to 5 rooms
Networks: 900/1800Mhz.
Consult with which operators it is compatible
CE certified and RoHS compliant
No broadband connection required
This booster can be used simultaneously by many users
Signal strength and diagnostic indicators
Full carrier network protection
5-year warranty

Compatibility with Carriers and Mobile Networks in Spain

2G Telephony - GPRS Voice and Data Calls

Movistar, Vodafone, Orange, Yoigo and their Virtual Mobile Operators

3G Telephony - UMTS Voice and Data Calls

Movistar, Vodafone and Orange. Only in specific regions (rural and remote areas).

4G Telephony - LTE Voice and Data Calls

Movistar, Vodafone, Orange and Yoigo.

Note: The amplifier is compatible with the technologies and networks specified above, however, it is possible that due to the deployment of the companies' networks some of the technologies are not available (no 3G or 4G). To know the ideal frequencies for each particular case, please visit our guides for Android and iPhone.

Specifications

Additional information

Explanation of frequencies:

The 800Mhz
800Mhz is one of the frequencies used by 4G. This frequency is extraordinarily effective in rural areas. Most mobile operators use 4G on 800Mhz in rural areas.

The 900Mhz
900Mhz. is used for the GSM network. GSM is a robust standard used by your phone and your carrier's base station to transmit voice signals. It has been around for a long time, which is a testament to how satisfactory it is. All phones, including older "non-smart" phones can use this standard.
The 900Mhz. is a relatively low frequency, which propagates excellently through the field. Chances are you have this frequency available outside your home (can you make calls from outside your home?). It also uses much less power than 3G or 4G, so your cell phone battery will last longer!

The 1800Mhz
1800Mhz is an intermediate frequency. Most operators transmit GSM and EDGE data on 1800Mhz in cities. EDGE data has low bandwidth, and is only suitable for email. Many mobile operators use 1800Mhz. also for 4G.

The 2100Mhz
The 2100Mhz. frequency is used by all mobile operators for the 3G network. It is available in all cities, and offers very high data speeds. It is also available in many rural areas, but you should check with your mobile outside your building to see if you can receive this frequency. Normally, if you can browse the Internet with your phone while outside, you are most likely using 3G on 2100Mhz.

The 2600Mhz
The 2600Mhz band is used for 4G in cities. This frequency is perfect for providing high speed broadband (it is even faster than 3G). This frequency is mainly used in cities.

how to install a mobile signal repeater?

Having poor reception on your cell phone can be annoying to say the least, but it can also be downright irritating.
If you live right on the edge of a mobile operator's network, then a mobile signal repeater may be the solution you need.
Forget about standing by the window, or going "on a hike" to make that important call.

1.Find the spot outside your home or office where the signal is strongest. You can use your cell phone for this. Of course, the stronger the signal, the more signal bars your phone's signal level indicator will show. The antenna can be placed outside, or in the attic, if that's easier for you. Even in a window frame. The most suitable spot is almost always on the roof, if you can access it.
2.Now it's time to install the booster. Mobile signal boosters use a distribution system based on a horizontal plane, so your device will work best if you place the booster on the same floor where you will be making most of your calls.
3.Once you have the antenna in place and the booster in place, connect the antenna to the booster using the coaxial cable. Also connect the amplifier to the indoor antenna(3).
4.The only thing left to do now is to connect the amplifier to the power supply(4) and turn it on: your mobile signal should now be at maximum.

Videos

Components included

Dimensions

Size of the BOSSGSM-GD
Weight (Kg) 1.00	Width (cm) 19.00	Height (cm) 3.50	Length (cm) 32.00

Downloads

	Description		Date	Size
	Installation guide		05-02-2016	951.99 KB
	Datasheet		15-03-2016	564.25 KB

GSM/DCS/3G/4G/5G equipments

GSM/DCS/3G/4G/5G » REPEATERS » BIBAND » BOSSGSM-GD

1000m2 repeater kit, 5 rooms, 900/1800Mhz