GSM/DCS/3G/4G/5G » REPEATERS » BIBAND » BOSSGSM-LE-HP27

Tri-band smart repeater with LCD touch screen, AGC, MGC, ALC, 27Dbm, 4000 m2, 1 Kilometer, 4G LTE800 / EGSM (Extended GSM 900mHZ)

VOICE & DATA, 4G, 3G
Provides high-speed downloads with low latency while enabling quality voice calls.

AMPLIFIES ALL CARRIERS
Supports all mobile operators and all phones.

ALLOWS UNLIMITED NUMBER OF USERS
Provides high-speed downloads to an unlimited number of users throughout your building.

COVERAGE UP TO 60,000M2
Our modular system provides quality coverage even in the largest buildings.

NO SPEED REDUCTION DURING PEAK HOURS
Unlike WiFi switches, which can limit the number of concurrent connections, repeaters are not affected by an increase in the number of users.

City_people_425px_reduced

ELIMINATES WIFI MANAGEMENT
No need to manage your clients' WiFi passwords.
No need to fight with security and GDPR.
Customers use their own mobility plans for data and calls.

LCD touch screen
Through the display, you can intuitively see the outside signal strength on the left, output power on the right, currently used frequency band on the top, isolation status and AGC working display status, and UP/DN in the middle showing uplink and downlink gains. You can manually add or subtract gains via the two triangular buttons below. The letter A in the lower right corner represents that you can switch between manual mode or smart mode according to your request.

Provides mobile signal in large outdoor areas with no signal, apartments, hospitals, ships, houses, parking lots, warehouses, tunnels, mines and elevator shafts.

-The ideal mobile repeater for 800/ 900 / 1800Mhz frequencies.
-The antenna located on the roof receives the frequency signal used in mobile telephony, the signal is conducted through the coaxial cable to the mobile repeater installed inside the premises.
-The repeater amplifies the signals and retransmits them in the area where you need coverage.
-Your cell phones, laptops and tablets can now communicate thanks to these amplified signals.
-This repeater amplifies the frequencies:
-4G LTE 800Mhz / EGSM (Extended GSM 900mHZ)
-CE certified and RoHS compliant:

Features:
LTE800 / EGSM (Extended GSM 900Mhz), Tri-band smart repeater with AGC, MGC, ALC, 27Dbm
Cost effective solution for weak signal areas.
Compact size, low power consumption, easy installation, excellent coverage.
Cover approximately 500 ~ 2000 m² without blocking or obstruction.
High linear design, ALC function design, low interference to BTS.
Support any cellular devices (voice, data and video)
Broadband signal amplifier or customize selective band amplifier.

Description :
The indoor signal booster series is an ideal solution for small to medium sized businesses and home users looking to improve indoor wireless connectivity. It connects via coaxial cable to the Donor Antenna and Service Antenna, the Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.

Advantages:
Intelligent function, intelligent digital mode setting.
Intelligent function call which can be activated through the front digital panel.
users can adjust the gain and choose the working band by LED digital panel, this intelligent function is easier than DIP switch, it will set parameters faster and more accurate,
It is a simple, safe and effective way.

Standard package:
1) AC90-264V, 1PCS power supply adapter.
2) AC power cord (standard EU / US / UK / SA / China, etc.) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended accessories :
1) Donor antenna : Periodic logging antenna (9dBi, 806-960 / 1710-2700MHz).
2) Service Antenna: Omni roof antenna (3dBi, 806-960 / 1710-2700MHz)
3) LMR240-LMR400 coaxial cable with connector (cable length optional)

Application:
-To extend signal coverage where it is weak or unavailable.
-CE certified and RoHS compliant
-No broadband connection is required
-This booster can be used simultaneously by many users
-Signal strength and diagnostics indicators
-Complete carrier network protection
-2 years warranty

Compatibility with Operators and Mobile Networks in Spain

2G Telephony - GPRS Voice and Data Calls
Movistar, Vodafone, Orange, Yoigo and their Virtual Mobile Operators
3G Telephony - UMTS Voice and Data Calls
Movistar, Vodafone, Orange, Yoigo and their Virtual Mobile Operators
4G Telephony - LTE-4G Voice and Data Calls
Movistar, Vodafone, Orange, Yoigo and their Virtual Mobile Operators

Warning: The amplifier is compatible with the technologies and networks specified above, however, it is possible that due to the deployment of the companies' networks some of the technologies are not available (no 3G, 4G). To know the ideal frequencies for each particular case, please visit our guides for Android and iPhone.

Specifications

1-Signal intensity
2-Isolation condition:
Green color: normal
Orange: weak self-excitation
Red: strict self-excitation.
3-Work frequency band, this position can be touched to switch the frequency.
4-Overpower alarm status display:
Green: AGC normal Orange: AGC works in the range of 1-15dB overpower alarm
Red: AGC works alarm overpower 15dB.
5-Outdoor output signal
6-Sleep function
7-The booster output signal strength.
8-Downlink gain.
9-Touch function.
Manual mode and Smart mode (press 2 seconds to switch the mode, touch lightly to return back, and please pay attention that all buttons can not be used under smart mode.
a. When the booster under smart mode, the screen display is green color, when the booster under manual mode the screen does not display green.
b. Back button (touch lightly within 1 seconds can be returned).
10-WIFI function, when the booster connect WIFI, the WIFI icon will display.
/Remote monitoring (WiFi function with 2.4Ghz): Booster connects to the cloud server through the Internet provided by the WiFi router, and the booster will actively report its working status (such as power, gain, alarm status, etc.) to the cloud server in real time, and the booster parameters can be adjusted through the cloud server ( Such as attenuation value, radio frequency switch, etc.) to be configured to realize 24/7 remote monitoring of the booster.
11-Press the inverted triangle to set up and decrease the gain.
12-Bluetooth, when the booster connect Bluetooth, the Bluetooth icon will display.
/Local monitoring(Bluetooth function): APP connects with booster via Bluetooth, you can view booster working status (such as power, gain, alarm status, etc.) and configure booster parameters (such as attenuation value, radio frequency switch, network, etc.), And you can add booster to the device list of APP via Bluetooth.
13-Press the triangle button to set up and increase the gain.
14-Uplink gain.
15-The booster input signal strength.

/Forward without distortion, without disturbing others /High sensitivity, large input dynamic range, clear calls at near and far /Small size, light weight, high quality, low power consumption, low cost /Implementation of international CE standards, leading performance indicators /Higher system gain, and the gain is continuously adjustable /Full-duplex operation, with high isolation between uplink and downlink /Standard design of ports at both ends, extremely convenient for installation /Using ALC technology, the output level is continuously adjustable, stable and reliable /Optional intelligent monitoring, APP design, automatic fault alarm and remote maintenance /High linearity power amplifier, stable performance /MGC function: ≥ 31dB/1dB step From above data, you can see that our stepping is more accurate, our accuracy is 1dB.

utilities:

Additional information

Explanation of frequencies:

The 800Mhz
800Mhz is one of the frequencies used by 4G. This frequency is extraordinarily effective in rural areas. Most mobile operators use 4G on 800Mhz in rural areas.

The 900Mhz
900Mhz. is used for the GSM network. GSM is a robust standard used by your phone and your carrier's base station to transmit voice signals. It has been around for a long time, which is a testament to how satisfactory it is. All phones, including older "non-smart" phones can use this standard.
The 900Mhz. is a relatively low frequency, which propagates excellently through the field. Chances are you have this frequency available outside your home (can you make calls from outside your home?). It also uses much less power than 3G or 4G, so your cell phone battery will last longer!

The 1800Mhz
1800Mhz is an intermediate frequency. Most operators transmit GSM and EDGE data on 1800Mhz in cities. EDGE data has low bandwidth, and is only suitable for email. Many mobile operators use 1800Mhz. also for 4G.

The 2100Mhz
The 2100Mhz. frequency is used by all mobile operators for the 3G network. It is available in all cities, and offers very high data speeds. It is also available in many rural areas, but you should check with your mobile outside your building to see if you can receive this frequency. Normally, if you can browse the Internet with your phone while outside, you are most likely using 3G on 2100Mhz.

The 2600Mhz
The 2600Mhz band is used for 4G in cities. This frequency is perfect for providing high speed broadband (it is even faster than 3G). This frequency is mainly used in cities.

how to install a mobile signal repeater?

Having poor reception on your cell phone can be annoying to say the least, but it can also be downright irritating.
If you live right on the edge of a mobile operator's network, then a mobile signal repeater may be the solution you need.
Forget about standing by the window, or going "on a hike" to make that important call.

1.Find the spot outside your home or office where the signal is strongest. You can use your cell phone for this. Of course, the stronger the signal, the more signal bars your phone's signal level indicator will show. The antenna can be placed outside, or in the attic, if that's easier for you. Even in a window frame. The most suitable spot is almost always on the roof, if you can access it.
2.Now it's time to install the booster. Mobile signal boosters use a distribution system based on a horizontal plane, so your device will work best if you place the booster on the same floor where you will be making most of your calls.
3.Once you have the antenna in place and the booster in place, connect the antenna to the booster using the coaxial cable. Also connect the amplifier to the indoor antenna(3).
4.The only thing left to do now is to connect the amplifier to the power supply(4) and turn it on: your mobile signal should now be at maximum.

Videos

Components included

Dimensions

Size of the BOSSGSM-LE-HP27
Weight (Kg) 80000.00	Width (cm) 268000.00	Height (cm) 58000.00	Length (cm) 354000.00

Downloads

	Description		Date	Size
	Manual		02-09-2019	609.61 KB
	Datasheet		02-09-2019	135.8 KB

GSM/DCS/3G/4G/5G equipments

GSM/DCS/3G/4G/5G » REPEATERS » BIBAND » BOSSGSM-LE-HP27

Tri-band smart repeater with LCD touch screen, AGC, MGC, ALC, 27Dbm, 4000 m2, 1 Kilometer, 4G LTE800 / EGSM (Extended GSM 900mHZ)